Black Friday cam selection

[asylummotorsports]

Ok! Lets hear your thoughts!

3500 Beretta, with a very strong 3t40, 3:73 FDR and an EP lsd.

S&S headers, 65mm TCE TB, basically all the food stuff on a GREAT OBD-1 tune.

Ran 14.0 and 99.75 mph.

NOW Ben has suggested the 3314 profile (.224/224 @ .050/ .536/.536 yadda, yadda)

And as much as I respect the suggestion, and the $30 it cost me, I'm looking for final thoughts on this.

Basically a limited street/drag car. Auto so it has to idle. And it gets driven to all meets/races. Some of which involve hundreds of miles.

Emissions are not a factor.

SuperDave is big on lots of duration with the 3500, but with and auto that may present idle issues.

And 6500 RPM is about my "Diaper-factor".

ANY thoughts before Friday are appreciated..


THANX F0LKS!!

[Mars]

That selection service was IMHO money WELL spent. Go with it !!

See you next year Eric !

[robertisaar]

what's the stock cam specs? same as a gen 3 cam?

[asylummotorsports]

They all use the same .436 lift cam. .2727 X 1.6

[ForcedFirebird]

After owning the software and designing a couple cams, I will have to say you won't be disappointed with the selection.

[robertisaar]

depending on a few variables, i see the potential for a ~50HP bump from a cam alone...

[Superdave]

After owning the software and designing a couple cams, I will have to say you won't be disappointed with the selection.

x2, you'll love it.

[3400beretta]

.224/.226 @ .050 .539/.532

and like I said earlier.. drop the LSA to 112, ICL 112 or 113.

[IsaacHayes]

What is your stall speed? 3314 on both intake and exhaust? Should make some good power.

[SappySE107]

3314/3314 113 ICL 112 LSA

Those are what I have written down.

[IsaacHayes]

That's some decent duration, not sure how it will idle at 900 RPM, but you could always go with a bigger stall if that was an issue.

[robertisaar]

you should see how much it changes the powerband... it's a bit ridiculous. great for a track car though.

[geldartb]

That's some decent duration, not sure how it will idle at 900 RPM, but you could always go with a bigger stall if that was an issue.

mine idles fine at 900. little less lift than what he's getting but it idles fine.

[IsaacHayes]

Cool. Good to know.

Eric, so you've decided against boost now?

[geldartb]

i was running at 1000-1100 for awhile and last week i decided to see how low i could get it to idle at.

it sounds good with a low idle. ill get a video before the white stuff falls.

Eric i thought you were dead set on going turbo or are you going for a combo of both boost and a cam.