Need a Big Bump Stick!

[blownarrow]

Buliding a 3.4 iron head and need a new bump stick for the build..

looking for a grind: 1.5:1 rocker
Valve lift: .489, Ad Dur: 277*, cam lift: .326" dur@.050: 230*, lobe cen: 110*
and come in just under $150...

thanks

[ForcedFirebird]

You plan on getting lifters with it for that price? Not going to happen on a custom cam, maybe something of the shelf.

EDIT: Actually that's not a crazy bump stick and I have one very similar I installed in an engine never ran. Would sell it for $150 plus shipping (including lifters). Also hve a 252 and 260h I need to get rid of(they are nitrided though, more $$).

[montess408]

you should check with ari motors . they have alot of cam choices for the 2.8/3.1/3.4 at deacent prices

[Superdave]

you can get the same cams they offer for lower prices from Summit and other online vendors.

http://members.shaw.ca/betterthanyoutoo/camshaft_guide.htm

[ForcedFirebird]

you should check with ari motors . they have alot of cam choices for the 2.8/3.1/3.4 at deacent prices

We can offer more of a variety for similar prices. They still have the Crane listed for $300

Little longer .006" duration that you are asking for, but here's the cam card for that "used" cam I have (was going to be N/A and changed my mind mid-build)...

[SappySE107]

60V6 has never and will never recommend ARI.

[blownarrow]

Little longer .006" duration that you are asking for, but here's the cam card for that "used" cam I have (was going to be N/A and changed my mind mid-build)...

With 1.6:1 rockers thats a IN:.484 and EX:.496
That's really close and I think I may just take that off your hands! Will it have a Lopey idle?
--The cam I mentioned above is an Engle Cam. Part# 21646-H Grind# EP-46HYD
Discription: Hot Street, with lopey idle 9-10 to 1 compression. Hot street & strip power, 2000-6000rpm

60V6 has never and will never recommend ARI.

ya... So what's with the bad blood with ARI on this site? Who they screw over?
I've never delt with them.. just curious????

[asylummotorsports]

Cheap-Fast-Reliable


Pick any two!

[ForcedFirebird]

It better be lopy with that tight of of an LSA.

[blownarrow]

ForcedFireBird: PM sent!