500 results in 0.1025 seconds.
-
Is the Rust on These Heads A Problem?
Had a valve job done on the heads of a 1990 3.1L Vin T engine back in 2007 and never used them. The heads were stored in my unheated garage and developed... -
Misfire is driving me completely bonkers, help!
Hey guys,
I still have a problem with misfiring. I have replaced the following with new/remanufactured
Injectors
Plugs...Last edited by 3rdgen8284; 11-27-2016, 10:29 AM. -
Timing headache!
I have been lurking, browsing several of the already made timing threads and yet here I am with a new one...
I have timed this engine 10... -
Oil filter threaded nipple
I'm trying to find the threaded nipple that goes into the block to mount the oil filter. I have an 02' 3400 from an Impala. It seems to be a mystery... -
LZ9 Uplander engine rough/coarse above 4k rpm
Hey guys, I have an '08 Uplander with the 3.9 LZ9 with an Overkill engine/tranny tune.
Has run great the last 5 years and now has almost 180,000... -
3100 LIM/Head Gasket/Block...?
My daughter asked me if I'd do a brake job on a friend's '98 Malibu (poor College Kid story). It was metal-on-metal and the tires are dry-rotted, so they...Last edited by Admiral Ballsy; 05-22-2016, 10:44 AM. -
3400 replacement engine question
Hello sorry for the simple question. I have a 2005 Equinox with a bad engine. Has a rod knock. Can I use any aluminum head push rod 3400 as a replacement... -
First or second design for intake gaskets?
Hello, I have a 1996 Grand Prix that needs intake gaskets. I'm finding there is a first and second design. Is there anyway to tell which one I need... -
About Timing and Timing chain on 3100
Recently I bought a bluetooth OBD2 reader, and the Torque App. There are no trouble codes, but in the data feed while the car is running, it says the...Last edited by TorqueEffect; 01-21-2016, 05:45 PM. -
3400 just quits - need help with diagnosing
Running a 3400 (LA1) with DIS / 7730 ECM. Last couple weeks while driving, engine just suddenly quits. Starts up, goes for a bit, then quits. Same behavior... -
94 Trans Issue
My Mom's 94 Grand Prix,when she puts the gear selector from reverse to drive,
sometimes won't drop into drive and move forward until she moves... -
A/C not working
I have tested the compressor and it works when I jump the wires to make it start.
Obviously the a/c clutch engages otherwise the pump will not... -
does injector length make a difference?
anyways 4 of the old injectors read less than 11ohms so I got 6 to replace them.
now the problem i have is that the original ones from the car... -
1988 cutlass supreme start and stall when cold
Hello Guys and Gals,
I have a 1988 olds cutlass supreme with a 2.8 MPFI. It has a few problems and I have replaced quite a few things on the car...
