Im working as fast as I can. If anyone has a spare piston or 2 from a 3400/3500 etc let me know. This isnt even an official teaser though....teasers normally have pics or a vid. sorry. I will def get pics as soon as i get anything in, but i dont know eta yet.
-
-
I have a 3400 piston and forced has a 3500 piston I bet:PBen
60DegreeV6.com
WOT-Tech.comComment
-
ok. well thats another piece to the puzzleComment
-
I have a 3500 piston if he doesn't.-Brad-
89 Mustang : Future 60V6 Power
Follow the build -> http://www.3x00swap.com/index.php?page=mustang-blogComment
-
Ill put my ffp udp up for sale as soon as I see pics.
In other words i'm 100% interested.Comment
-
Steel... will they still be lighter than the stock ones? I'm assuming it would be due to just size difference alone, but going from the cast to aluminum is a big jump, I can't imagine you can obtain the same difference with steel.
Got Lope?
3500 Build, Comp XFI Cam 218/230 .050 dur .570/.568 lift 113LSA
Fully Balanced, Ported, 3 Angle Valve Job, 65mm TCE TB, S&S Headers.
Stage-1 Raybestos/Alto 4t60e-HD, EP LSD, 3.69FDR
12.61@105 Epping NH Oct 2015 Nitrous 100shot (melted plugs) 13.58@98.8 N/A 3200LBSComment
-
Most of them are steel, and an SFI would def have to be steel. But even with being being underdriven in steel, they are normally lighter than stock in a regular ratio, and underdriven will be that much less mass to moveComment
-
interest here too!Andy
sigpic
fastest 1/8: 10.19@ 67.17
fastest 1/4: 16.16@ 82.70
62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.
Comment
-
new guy here, quoted for effect.Originally posted by torq455 View Post
I just got another engine put in i figure i can start trying to mod it.Comment
-
fwiw this one seems to be the easiest mod worth the most power without compromising drivability if you go with the 10%....IF they look at making a 25% i would either get a higher outpul alt or go with an overdriven alt pulley and if possible a waterpump pulley as well. on some autos with alot of stereo equip, it can be a drain sometimes on the cooling and charging system. for normal DDs i would go 10% all the way, for a more race inspired car 25% would be most effective.Comment
-
that's why 18% is perfect. simply raise the idle ~100 rpm, and that counter acts the low alt output at idle.Andy
sigpic
fastest 1/8: 10.19@ 67.17
fastest 1/4: 16.16@ 82.70
62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.Comment
-
You should work for powerbond.Ben
60DegreeV6.com
WOT-Tech.comComment
-
ohhh i wish!!!!
Andy
sigpic
fastest 1/8: 10.19@ 67.17
fastest 1/4: 16.16@ 82.70
62mm TB, 1.6 roller tip rockers, Ostrich 2.0, UD pulley, TB heater bypass, K&N, 180* stat, No cat, 99Grand AM dual cooling fans. 4T65E swap FDR 3.69, EP LSD, F.A.S.T. transmission controller, TransGo shift kit.Comment
-
too bad they are in australia. hah. well they are either 25 or 10 % take it or leave it. personally ill take a 10%. good enough for me...along with the ARP Crank Bolt....
Comment
-
im not sure what i would want. i do have an amp, 800 peak and 400rms... but i want every little bit of power i can get lolsigpic
88 Beretta CL- 13.641@102.76mph (rwd LS1/t56 conversion in progress)
77 Celica GT- 3400/3500 swap in progress (engine from the beretta)Comment
Comment