moates ZIF

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • 95SleeperAcheiva
    ArtofOlivia"PocketRocket"
    • Jun 2006
    • 694

    #1

    moates ZIF

    could I get a price or option.....

    I have a 1227730 ECU going into my '95 achieva. I got the ecu from a junk yard donor corsica circa '92, v-6. that's all i got for info on donor.

    I would like a swap chip with the "3400 swap chip" burn on it with automatic and the moates version with the ZIF. I'm not really concerned with shift points, I plan on flashing them way off the board and doing all manual shifting, hence I'm swapping the valve body from a grand prix so I can get 1st gear at the shifter.

    So do I buy the chip and send it to you from moates or can you get it and burn it, then send it to me?

    side note, all track only. ecu has no control over fuel pump or fans, no emissions, heavy port and polish work, 75mm TB, 110 stat, 5k stall converter, no accessories ie no water pump, PS, a/c, cruise, abs, SRS, etc, all gone.

    As you can see I missed a year of racing and have been a busy boy.
    sigpicHow to make High performance Emissions:
    A "true" High flow converter, straight pipe.
    Low/No flow EGR valve, block off plate.
    Carbon canister and purge valve mod, place in large 30 Gallon can, cover, and place curbside, the city will do the rest.
    PCV valve and vent tube, reroute to exhaust to dump where it belongs, on the ground. Or add breathers and let it all free.
  • SappySE107
    WOT-Tech
    • Oct 2003
    • 13514

    #2
    Do you want just a chip, chip and adapter, or chip with adapter with zif? The only part I don't have here is the ZIF.
    Ben
    60DegreeV6.com
    WOT-Tech.com

    Comment

    • 95SleeperAcheiva
      ArtofOlivia"PocketRocket"
      • Jun 2006
      • 694

      #3
      chip with adapter with zif.
      sigpicHow to make High performance Emissions:
      A "true" High flow converter, straight pipe.
      Low/No flow EGR valve, block off plate.
      Carbon canister and purge valve mod, place in large 30 Gallon can, cover, and place curbside, the city will do the rest.
      PCV valve and vent tube, reroute to exhaust to dump where it belongs, on the ground. Or add breathers and let it all free.

      Comment

      • SappySE107
        WOT-Tech
        • Oct 2003
        • 13514

        #4
        I can do chip and adapter. You will have to go to moates for the ZIF.
        Ben
        60DegreeV6.com
        WOT-Tech.com

        Comment

        Working...