Underdrive pulley with damper for 3400

[gectek]

Wow, lots of interest already. Doesnt it seem like there are alot of things happening all at once all of a sudden? I guess the economy really doesnt suck.

[Alxsmt]

i would buy one for sure

[geldartb]

sounds good id love to see this happen.

[SappySE107]

Right. Its never the wrong way to have it balanced with everything and I don't believe there is any balance to offset for the stock damper.

It will be steel, not aluminum.

[IsaacHayes]

Yup. Now some of the OLD OLD 2.8 RWD iron heads I believe had externally balanced stuff, but not ours.

[3400-95-Modified]

I would assume that after what I was told... And technically these are not balancers.... We only have a pulley with a Harmonic dampener, since as noted, internal balancing is achieved.

[mfuller]

So I could conceivably put one of these SFI Race serpentine balancers on my balanced 3400 bottom end and not have any issues.....right?
If so, very interested.

[3400-95-Modified]

Thats what I thought, so having your lower end balanced with the stock dampener is either the wrong way, or it's not even being used in the balancing process.

[IsaacHayes]

We don't have externally balanced motors. Nothing to worry about.

[3400-95-Modified]

I thought our cranks were internally balanced already so when you balance a lower end all your doing is matching all the rod/piston assy's to the same weight and such and then you would just use a balanced pulley... in other words I did not think we had externally balanced motors.

[mfuller]

GODDAMNIT! I just used a factory pulley to have my bottom end balanced!

[3400-95-Modified]

Would love to see this happen.

[98blackbu]

Id be down.

[sprucegagt]

You know I'm interested.

[sanjay]

I'm definately interested. Would these be in steel or aluminum?? (Not sure if an aluminum balanced UDP can be made)..